Engine Removal/Installation - Honda CX650C 1983 Shop Manual

SERVICE INFORMATION 5- 1
ENGINE REMOVAL
5--2
ENGINE INSTALLATION 5-7
. - - - . p -
- -
!
SERVICE INFORMATION
GENERAL
B)
Parts requiring engine removal for servicing:
-
Crankshaft, Pistons
Connecting rods
Camshafts
*
Flywheel and starting clutch
Gearshift spindle
Transmission
-
Water pump mechanical seal
@
Remove and install the engine with
a
hydraulic jack to support the engine's weight.
@
Drain the engine oil before removing the engine if the front or rear cover is to be removed.
For cooling system removal and installation, see section 9, Cooling System.
SPEC1 FICATIONS
Engine weight
Engine oil capacity
Engine oil recommendation
Coolant capacity (Radiator and engine)
TORQUE VALUES
Front engine hanger nut
Front engine mount bolt (10 mm)
(12 mm)
Rear engine mount bolt (10 mm)
(12 mm)
Left foot peg bolt
Passenger foot peg bolt
Exhaust chamber bolt
Muffler band bolt
74.5 kg (164 lbs)
3.6 lit (3.8 US qt, 3.2 Imp qt)
See page 2-1
1.7 lit (1.8 US
qr,
2.5 Imp qt)
30 - 40 N.m (3.0 - 4.0 kg-m, 22
-
29 ft-lb)
45 - 70 N.m (4.5 - 7.0 kg-m, 33 - 51 ft-lb)
60 - 80 RI-m (6.0 - 8.0 kg-m, 43 - 58 ft-lb)
45
-
70 N.m (4.5
-
7.0 kg-m, 33 - 51 ft-lb)
60 - 80 N-m (6.0 - 8.0 kg-m, 43 - 58 ft-lb)
30 - 40 N.m (3.0 - 4.0 kg-m, 22 - 29 ft-lb)
45 - 60 N.m (4.5 - 6.0 kg-m, 33 - 43 ft-lb)
24 - 30 N.m (2.4
-
3.0 kg-m, 17 - 22 ft-lb)
18 - 28 N'm (1.8 - 2.8 kg-m, 13 - 20 ft-lb)
Bate of Issue: December, 1982
0 HOrdDA MOTOR CO., LTD.