Flywheel Installatiom - Honda CX650C 1983 Shop Manual

ALTERNATORlFLar'WCIEEbI
REAR COVER
Slide the spring into the plunger and install it
in
the
clutch outer.
Position the rolier into piace whiie holding the
plunger with a screwdriver as shown.
THRUST WASHER NEEDLE ROLLER BEARING
Install the reduction shaft, thrust washers and
reduction gear.
Use two thrust washers, one on each side of
the reduction aear.
Install the needle roller bearing in the drive gear.
Install the drive gear onto the crankshaft.
REDUCTION GEAR DRIVE GEAR
FLYWHEEL INSTALLATIOM
Install the flywheel onto he crankshaft.
NOTE
~d
Align the key in the crankshaft with the
keyway in the flywheel.
s
Rotate the flywheel counter-clockwise to
aid installation.
FLYWHEEL
Date
of
Issue: December, 1982
O HONDA MOTOR CO.,
LTD.