Oil Pressure Switch; Brake Light Switch - Honda CX650C 1983 Shop Manual

SWITCHES/ LIGHTS
OIL PRESSURE SWITCH
Drain the engine oil.
Remove the radiator (page 9--6)).
Disconnect the oil pressure switch lead and remove
the switch.
Check for continuity while applying pressure
to
the
switch.
Replace the switch i f necessary
Apply a liquid sealant to the switch threads before
installing the switch.
Screw the switch in the crankcase and leave two
--
threads from the bottom. Then tighten i t to the OIL P R E S S U ~ E SWITCI-I
specified toraue. Do not over tiahten it.
prevent damage to the engine cover.
CON
30
F
(0.3
- -
REAR BRAKE LIGHT SWITCH
--
4 psi)
d
BRAKE
LIGIJiT
SWITCH
Check the rear brake light switch for continuity
with the rear brake applied.
FRONT BRAKE LIGHT SWITCH
Check the front brake light switch for continuity
with the front brake applied.
Replace the switch, if necessary.
Date of
Issue:
December, 1982
O
HONDA MOTOR CO., LTD.