Operating The Control Software; Exposure Control; Figure 25. Shutter Mode Drop-Down List Box; Figure 26. The Shutter Switch Drop-Down List Box - JAI TM-9730CL User Manual

7.3

Operating The Control Software

7.3.1

Exposure Control

In Exposure Control, you can specify the shutter mode. Scan mode is deactivated for the TM-9730CL.
7.3.1 (a)
In the Shutter Mode drop-down list box you can select No Shutter mode, Manual, or Direct shutter.

Figure 25. Shutter Mode drop-down list box.

7.3.1 (b)
Use the Shutter Switch drop-down list box to select a pre-configured shutter speed.

Figure 26. The Shutter Switch drop-down list box.

7.3.1 (c)
The Direct drop-down list box allows you to select camera speed using a slider. The camera must be
in Direct Shutter Mode. The Shutter Switch is disabled when Direct is active.
30
TM/TMC/RM/RMC-9730CL
Shutter Mode
Shutter Time
Direct
Software Introduction