7.1 Operating The Control Software
7.1.1 Exposure Control
The TM-2030CL exposure control allows you to select Continuous or Trigger modes using the appropri-
ate radio button. Notice that Continuous and Trigger mode offer slightly different menus.
7.1.1 (a)
The Shutter Speed drop-down list box allows you to select the specific shutter speed for manual shut-
ter and Async shutter. Manual shutter speed 0 is no shutter mode; Async shutter speed 0 is Async No
Shutter mode; Async shutter speed 9 is Async no delay shutter mode (pulse width control). A = PIV
fixed exposure, B = PIV PWC. For detailed shutter information, please see "Electronic Shutter" on
page 34.
Figure 33. Continuous mode operates the shutter based on the camera settings.
7.1.1 (b)
"Scan Area" offers a full scan or 2x2 binning when "Shutter Speed" is set at zero. Notice the "Expo
(lines)" setting is disabled.
Figure 34. The camera offers full scan or binning.
TM/TMC/RM/RMC-2030GE
Continuous Mode Shutter Speed
Scan Area
GUI Features
- 33 -