Auto Level Settings; Figure 29. Blemish Correction Radio Buttons; Figure 30. Auto Level Control; Figure 31. Active Auto Level Control - JAI TM-9730CL User Manual

Figure 29. Blemish Correction Radio Buttons

7.3.4

Auto Level Settings

Verify the on/off checkbox is checked to activate the Auto Level Control if the camera has the ALC
option.

Figure 30. Auto Level Control

7.3.4 (a)
Click the Configure button.
Set the Gain, Desired Lvl, and Tuning Factor and click Save Settings. The Load Default button allows
access to stored settings.

Figure 31. Active Auto Level Control

7.3.5 Table Selection
The Table Selection box allows you to select linear, knee, or gamma 0.45 camera output.
32
TM/TMC/RM/RMC-9730CL
Setting the ALC
Software Introduction