Camera Link Cable; Figure 4. Camera Link Cable; Table 3 Software Controllable Shutter Speed And Times Table - JAI TM-9730CL User Manual

Table 3
2.2.3

Camera Link Cable

The 26CL-02-26 cable assembly has been standardized as the Camera Link cable. This cable has the
26-pin connector on both ends. This is a straight-through cable. The pin-out configuration is shown
in Table 2 on page 5.
Figure 4.
Note: For TM-9730CL, serial communication for camera control is done by means of the Camera Link
connector on the rear panel of the camera.
Cable assemblies and board mount receptacles can be ordered from Intercon 1.
6
TM/TMC/RM/RMC-9730CL
Software Controllable Shutter Speed and Times Table
Shutter
Number
0
1
2
3
4
5
6
7
8
9
Camera Link Cable
Shutter Exposure Time
Normal
no (1/30)
1/60
1/125
1/250
1/500
1/1,000
1/2,100
1/4,500
1/10,500
1/31,500
Installation