Connector Pin Configurations; Figure 2. The 26-Pin Connector; Table 1 Hirose Power And Signal Integration - JAI TM-9730CL User Manual

2.2.2

Connector Pin Configurations

2.2.2 (a)
The TM-9730CL has a 12-pin Hirose connector for power input and signal integration. Pin #1 is
Ground and pin #2 is +12V DC. The pinout table is shown below. For the TM-9730CL, serial
communication camera control is done by means of the MDR26 Camera Link connector on the rear
panel of the camera
Table 1
Pin
1
2
3
4
5
6
2.2.2 (b)
The TM-9730CL has a 26-pin connector on the rear panel to output Camera Link data. The connector
pin-out is shown in Table 2 below.
Figure 2.
4
TM/TMC/RM/RMC-9730CL
12-Pin Connector
Hirose power and signal integration.
Description
GND (power)
+12V DC
GND (analog)
Video out
GND (digital)
Reserved
OP25-3 – RS-232 on 12-pin
Camera Link Connector
The 26-pin connector.
Pin Description
7 VD in
8 Reserved
9 HD in
10 RXD (RS-232)*
11 NC
12 TXD (RS-232)*
Installation