Please Note While Programming - HEIDENHAIN TNC 320 User's Manual For Cycle Programming

14
DATUM FROM INSIDE OF CORNER (Cycle 415, DIN/ISO: G415) 14.9

Please note while programming:

Danger of collision!
If you set a datum (Q303 = 0) with the touch probe
cycle and also use probe in TS axis (Q381 = 1), then
no coordinate transformation must be active.
Before a cycle definition you must have programmed
a tool call to define the touch probe axis.
The TNC always measures the first line in the
direction of the minor axis of the working plane.
357
HEIDENHAIN | TNC 320 | User's manual for cycle programming | 9/2016