Please Note While Programming - HEIDENHAIN TNC 320 User's Manual For Cycle Programming

Hide thumbs Also See for TNC 320:

Table of Contents

FACE MILLING (Cycle 232, DIN/ISO: G232) 11.7

Please note while programming:

Enter Q204 2ND SET-UP CLEARANCE so that no

collision with the workpiece or the fixtures can occur.

If Q227 STARTNG PNT 3RD AXIS and Q386 END

POINT 3RD AXIS are entered as equal values, the

TNC does not run the cycle (depth = 0 has been

programmed).

Program Q227 greater than Q386. Otherwise, the

TNC will display an error message.

HEIDENHAIN | TNC 320 | User's manual for cycle programming | 9/2016

Tnc 320 programming station