HEIDENHAIN TNC 320 User's Manual For Cycle Programming page 43

1.2 Available Cycle Groups
Overview of fixed cycles
The soft-key row shows the available groups of
cycles
Soft key Cycle group
Cycles for pecking, reaming, boring and counterboring
Cycles for tapping, thread cutting and thread milling
Cycles for milling pockets, studs and slots and for face milling
Coordinate transformation cycles which enable datum shift, rotation, mirror
image, enlarging and reducing for various contours
Subcontour List (SL) cycles, which allow the machining of contours
consisting of several overlapping subcontours, as well as cycles for cylinder
surface machining and for trochoidal milling
Cycles for producing point patterns, such as circular or linear hole patterns
Special cycles: dwell time, program call, oriented spindle stop, engraving,
tolerance
If required, switch to machine-specific fixed
cycles. These fixed cycles can be integrated by
your machine tool builder.
HEIDENHAIN | TNC 320 | User's manual for cycle programming | 9/2016
Available Cycle Groups
1
1.2
Page
64
94
130
250
218
176
274
43