Table of Contents
Advertisement
6.2
POLAR PATTERN (Cycle 220,
DIN/ISO: G220)
Cycle run
1 At rapid traverse, the TNC moves the tool from its current
position to the starting point for the first machining operation.
Sequence:
Move to the 2nd set-up clearance (spindle axis)
Approach the starting point in the spindle axis.
Move to the set-up clearance above the workpiece surface
(spindle axis)
2 From this position, the TNC executes the last defined fixed
cycle.
3 The tool then approaches on a straight line or a circular arc the
starting point for the next machining operation. The tool stops at
the set-up clearance (or the 2nd set-up clearance).
4 This process (1 to 3) is repeated until all machining operations
have been executed.
Please note while programming:
Cycle 220 is DEF active, which means that Cycle 220
automatically calls the last defined fixed cycle.
If you combine Cycle 220 with one of the fixed
cycles 200 to 209 and 251 to 267, the set-up
clearance, workpiece surface and the 2nd set-up
clearance that were defined in Cycle 220 will be
effective.
If you run this cycle in the Single Block mode of
operation, the control stops between the individual
points of a point pattern.
HEIDENHAIN | TNC 320 | User's manual for cycle programming | 9/2016
POLAR PATTERN (Cycle 220, DIN/ISO: G220)
6
6.2
177
Advertisement
Table of Contents
