Data Transfer - Leica 3D Disto User Manual

5.4.4

Data Import
3D Disto
, Instrument Setup

Data Transfer

Whilst other USB memory sticks may be used, Leica Geosystems recommends Leica
industrial grade USB memory sticks and cannot be held responsible for data loss or
any other error that may occur when using a non-Leica USB memory stick.
For some application it is possible to import DXF files. Data should be prepared on
the PC before. Only points are imported, no lines. Optional the data source can be a
PC or USB stick that is plugged into the Control Unit.

Remove unneeded data such as frames, logos, coordinates, or orienta-
tion arrows, in the DXF files before importing them.
USB Cable
1. For import from PC, connect
powered Control Unit and PC by USB
cable.
3D Disto_011
73