Unfold Mode - Leica 3D Disto User Manual

7.4.2
Description
Unfold mode step-
by-step
3D Disto
, Software Applications

Unfold Mode

The Room Scan allows to switch the view of the sketch area from foot print to face
mode. This option is active when a line connection is available.
1. Select a horizontal line between two points.
2. Press . Sketch area
changes from foot
print to face view.
3. All measured points of the vertical plane are displayed.
4. To measure details or wall dimension proceed as described in "6.3 Measurement
Workflow".
125