Table of Contents
Advertisement
Removing the Chassis Cover
The OPS+ Module consists of a computing board in a wrapper chassis.
Pease observe the following guidelines and follow the procedure to open the
system.
1. Make sure the system and all other peripheral devices connected to it
have been powered-off.
2. Disconnect all power cords and cables.
3. The 6 mounting screws on the sides and top cover of the system
chassis, and the 3 screws that affix the front panel to the chassis should
all be removed to open the system. Put these screws in a safe place for
later use.
Mounting screw
Mounting screw
4. Lift the cover up to open the system.
5. The SODIMM sockets are readily accessible after removing the chassis
cover.
CPU fan
Mounting screw
3
SODIMM
Advertisement
Table of Contents
