Environmental Specifications - Hitachi G200 Hardware Reference Manual

Environmental specifications

Temperature
Caution: The following VSP Gx00/Fx00 storage system components are not
supported in high-temperature environments. Do not operate the following
components at temperatures of 40°C or higher:
• DB60 dense drive tray
• HDS provided service processor (SVP) server
• First-generation FMDs (non-DC2 FMDs)
Operating
Non-operating
Transport, storage -22°F to 140°F
Temperature
change rate
(°C/h)
Operating
Operating
Non-operating
Transport, storage -22°F to 140°F
Temperature
change rate
(°C/h)
Humidity
Operating
110
State Controller
50°F to 104°F
(10°C to 40°C)
14°F to 122°F
(-10°C to 50°C)
(-30°C to 60°C)
10 or less
State Controller
50°F to 104°F
(10°C to 40°C)
50°F to 104°F
(10°C to 40°C)
14°F to 122°F
(-10°C to 50°C)
(-30°C to 60°C)
10 or less
State
Environmental specifications for VSP G200
Hitachi Virtual Storage Platform G200 Hardware Reference Guide
SFF, LFF drive
trays
50°F to 104°F 50°F to 95°F (10°C to 35°C)
(10°C to 40°C)
14°F to 122°F 14°F to 122°F (-10°C to 50°C)
(-10°C to 50°C)
-22°F to 140°F -22°F to 140°F (-30°C to 60°C)
(-30°C to 60°C)
FMD drive trays
DKC-F710I-1R6FM or DKC-F710I-3R2FM drive is installed:
50°F to 95°F (10°C to 35°C)
DKC-F810I-1R6FN/3R2FN/6R4FN/7R0FP/14RFP drive is
installed: 50°F to 104°F (10°C to 40°C)
14°F to 95°F (-10°C to 35°C)
-22°F to 122°F (-30°C to 50°C)
8 to 80
Dense intermix drive tray
Percentage