Cbss Controller; Cbss With Front Panel Bezel - Hitachi G200 Hardware Reference Manual

CBSS controller

The CBSS controller includes specific functional LEDs located on the front and
rear of controller and power supplies to provide its operating status.

CBSS with front panel bezel

The following table describes the definitions of the CBSS controller front
panel bezel LEDs.
1
2
3
4
26
Number
Virtual Storage Platform G200 controllers
Hitachi Virtual Storage Platform G200 Hardware Reference Guide
Item
POWER LED
READY LED
WARNING LED
ALARM LED
Description
Green: Storage system is
powered on.
Amber: Storage system is
receiving power.
Green: Normal operation.
Off: Normal operation.
Amber: Component requires
maintenance.
Blink: Failure requires
maintenance.
Note: When System Option
Mode 1097 is set to ON, the
WARNING LED does not blink,
even if the following failure
service information messages
(SIM) are issued: 452xxx,
462xxx, 3077xx, 4100xx, and
410100.
LED might turn off during user
maintenance.
Off: Normal operation.
Red: Processor failure (system
might be down). Go to the
Customer Contact Us page at