Service Processor Hardware Specifications - Hitachi G200 Hardware Reference Manual

Note: After the Initial Startup Wizard is run, the SVP can be used in non-
bridge mode. In this mode, the cables can be removed from SVP ports LAN3
and LAN4 and attached to switches. For more information, contact customer
support.

Service processor hardware specifications

The following table lists the hardware specifications for the service processor
(SVP) provided by Hitachi Data Systems.
Caution: The SVP is not supported in high-temperature environments. Do
not operate it in locations with temperatures of 40°C or higher.
Dimensions
Processor
Memory
Hard drive
Network interface card
Fans
Operating system
68
Number
Item
VSP service processor server
Hitachi Virtual Storage Platform G200 Hardware Reference Guide
Description
These ports connect to your IP network, the
management console PC, and the user LAN port
on each storage system controller.
Specification
Height: 1.7 inches (43 mm)
Width: 17.2 inches (437 mm)
Depth: 14.5 inches (369 mm)
Weight: 14 lbs (6.4 kg)
Celeron G1820 2.7-GHz 2M, 2C, 2T
• Cores: 2
• Instruction set: 64-bit
• SmartCache: 2 MB
• Maximum memory size: 32 GB
• Memory types: DDR3-1333, DDR3L-1333 @
1.5V
8-GB RAM DDR3
2 TB
x4 ports (on-board NIC) +
x1 IPMI (BMC) port
2 x 4-cm 4-pin PWM fans
Windows Embedded Standard 7