Environmental Specifications - Hitachi F350 Hardware Reference Manual

Current rating of breaker/
fuse (A)
Heat value (normal) (kJ/h)
Steady-state power (VA/W)
Power consumption (VA/W)
Notes:
1. The power current of Nx2 described in this table is required for a single power
unit.
2. If one power unit fails, another power unit requires electric current for the two
power units. Therefore, plan the power supply facility so that the current-carrying
capacity for one power unit can provide the total capacity for two power units.
3. This table shows the power requirement (100 V or 200 V) for the maximum
configuration . The actual required power might exceed the value shown in the
table when the tolerance is included.

Environmental specifications

The environmental specifications for the storage systems are described in the following
table.
Temperature
Caution: The following storage system components are not supported in
high-temperature environments. Do not operate the following components at
temperatures of 40°C or higher:
Hitachi Vantara-provided service processor (SVP) server
■
Hitachi Virtual Storage Platform F350, F370 Hardware Reference Guide
Item
16.0 (each electrical)
CBSS: 1800 or less
CBSL: 1550 or less
3
CBSS: 800/760 or less
CBSL: 800/760 or less
CBSS: 520/500 or less
CBSL: 450/430 or less
Appendix B: System specifications
Environmental specifications
Controller Drive tray
55