Setting Up Your System; Adjusting The Date And Time - i-SENS CareSens N Manual

Setting up Your System

Press and hold the S button for 3 seconds to switch on the
meter. After all settings are finished, press and hold the S button
for 3 seconds to turn off the meter.
Press or to reach the accurate value. Press and hold to
scroll faster.

Adjusting the Date and Time

Step 1 Entering the SET Mode
Press and hold the S button for 3 seconds
to switch on the meter. After all the
segments flash across the screen, the 'SET'
character will be displayed on the screen.
Press the S button again to progress onto
the next step.
Step 2 Setting the Year
Press and release or to adjust until
the correct year appears. Press and hold
button to scroll through the numbers
quickly. After setting the year, press the
S button to confirm your selection and
progress onto the next step.
14 www.i-sens.com
Step 3 Setting the Month
A number indicating the month will be
blinking on the left corner of the screen.
Press or until the correct month appears.
Press the S button to confirm your selection
and progress onto the next step.
Step 4 Setting the Date
Press or until the screen displays the
correct date. Press the S button to confirm
the date and progress onto the next step.
Step 5 Setting the Time
The meter can be set in the AM/PM 12-hour
or the 24-hour clock format. Press or to
select a format. The AM • PM symbol is not
displayed in the 24-hour format.
After selecting the format, press the S button
to progress onto the next step.
www.caresens.co.nz 15