Preparing The Lancing Device - i-SENS CareSens N Manual

Preparing the Lancing Device

Step 1
Wash hands and sample site with
soap and warm water. Rinse and dry
thoroughly.
Step 2
Unscrew and remove the lancing
device tip.
Step3
Firmly insert a new lancet into the
lancet holder. Hold the lancet firmly.
Gently twist to pull off protective disk.
Save disk to recap lancet after use.
Replace lancing device tip.
24 www.i-sens.com
Step 4
Select a desired depth of one-to-five
(1- 5) on the lancing device's adjustable
tip. Choose a depth by rotating the top
portion of the adjustable tip until the
setting number matches the arrow.
A beginning setting of three (3) is
recommended.
Step 5
To cock the lancing device, hold the
body of lancing device in one hand. Pull
the sliding barrel with the other hand.
The lancing device is cocked when you
feel a click.
Note: The skin depth to get blood samples will vary for
various people at different sample sites. The lancing device's
adjustable tip allows the best depth to get an adequate
sample size. A beginning setting of three (3) is recommended.
www.caresens.co.nz 25