Table of Contents
Advertisement
Section 7: Diagnostics and Troubleshooting
LED Test
Perform the LED Test as follows:
Action
Screen Display
1. Press the Test button associated with the
LED Test. "Testing.." is displayed (yellow) in
the test status column on the
"Diagnostics/Tests" screen while the 4 LEDs
light sequentially, left to right (amber, red,
green, green), 5 times. At the conclusion of
the test, a pop-up "Confirmation Window" is
displayed in the center of the
"Diagnostics/Tests" screen.
2. Within the Confirmation Window the
question "Did you see chasing LED pattern?"
is displayed.
If you press the Yes button, a green "Passed."
indication is displayed in the test status
column on the "Diagnostics/Tests" screen.
If you press the No button, a red "Failed."
indication is displayed in the test status
column on the "Diagnostics/Tests" screen.
7-7
Advertisement
Table of Contents
