Download  Print this page

Fail To Manual - Honeywell AlarmNet 7810iR Installation And Setup Gude

Internet communication module
Hide thumbs

Advertisement

3. Alarm message sent to Automation
Equipment, local message pushed into
History Window.

Fail to Manual

U L
Fail to Manual Mode cannot be used with UL installations.
If Fail to Manual is selected and there is a loss of communication between the 7810iR and
the Automation system, an incoming message will be reported as undeliverable to AlarmNet
after approximately 30 seconds. AlarmNet will then route all messages to the secondary CS.
1. Loss of Automation Equipment
communication with Fail to Manual feature
selected. Operator must manually respond
to incoming alarms.
2. Loss of Automation Equipment
communication with Fail to Manual feature
NOT selected. All messages from AlarmNet
will be bounced. AlarmNet will route all
message traffic for this CS to the Backup
Account CS.
Action
Action
Section 5: Operation
Screen Display
Screen Display
5-7

Advertisement

Table of Contents
loading

  Related Manuals for Honeywell AlarmNet 7810iR