Download  Print this page

Keypad Test; Touch Screen Calibration - Honeywell AlarmNet 7810iR Installation And Setup Gude

Internet communication module
Hide thumbs

Advertisement

7810iR Internet Communication Module Installation and Setup Guide

Keypad Test

The Keypad Test is not applicable for 7810iR.

Touch Screen Calibration

Calibrate the touch screen as follows:
1. Press the Diagnostics button on the
"Advanced Setup" menu screen. The
"Diagnostics/Test" screen is displayed.
2. Begin the Touch Screen calibration from the
"Diagnostics/Tests" screen by pressing the
Calibrate button. When the Calibrate button is
pressed, the Touch Screen Calibration
screen is displayed.
Within the Touch Screen Calibration screen
you are asked to Press the center of the box
in upper left corner. Press the center of the
square.
When this square is touched, the Touch
Screen Calibration screen displays Next
press the center of the box in the upper
right corner.
7-8
Action
Screen Display

Advertisement

Table of Contents
loading

  Related Manuals for Honeywell AlarmNet 7810iR