Honeywell AlarmNet 7810iR Installation And Setup Gude page 20

7810iR Internet Communication Module Installation and Setup Guide
4. Check Use Master Account # doughnut
only if the Master Account number is to be
used as the AlarmNet account. Otherwise,
touch each data field and enter the required
account information.
NOTE: If the Master Account# doughnut
is checked, the Primary Account
information is automatically filled in with the
Master Account Number information. This
information is displayed in gray and cannot
be edited as long as the Master Account #
doughnut is checked.
5. Use the data entry keypad to enter
required account information.
6. Check Enable Second CS to report this
7810iR power-on reset and test messages
to a second CS. Enter the required account
information by touching each field.
Select Options tab.
7. Old Alarm Time on 7810iR is only
applicable for power-on reset messages
and test messages.
Fault Time Minutes is not supported by the
7810iR.
Account Supervision s ets the AlarmNet
supervision period.
U L
C-U L
4-4
Action
For UL installations, US UL
Line Sec Account
Supervision must be
selected.
For C-UL installations, CN
UL Line Sec Account
Supervision must be
selected.
Screen Display