Table of Contents
Advertisement
FilmScan 200
3.2.8.5 Sensor Board Removal
Step 1:
Remove the engine unit (Refer to section 3.2.8.)
Step 2:
Remove the carrier holder block (Refer to section 3.2.8.4.)
Step 3:
Remove the CBB (black: M3 x 6) screw that secures the sensor board.
Step 4:
Remove the connector cable from the sensor board.
3-20
Carrier Holder Block
Sensor Board
Screw
Figure 3-27. Sensor Board Removal
Rev. A
Advertisement
Chapters
Table of Contents
