FilmScan 200
1.4.3 Control Code Handshaking Procedures
This section describes the control code handshaking procedures.
1.4.3.1 Control Code Without Parameters
Step 1:
Control code sent from host computer.
Step 2:
Response received from scanner.
ACK (06h): Legal control code received. (The scanner accepts the control code.)
NACK (15h): Illegal control code received. (The scanner does not accept the control code.)
1.4.3.2 Control Code With Parameters
Step 1:
Control code sent from host computer.
Step 2:
Response received from scanner.
ACK (06h): Legal control code received. (The scanner accepts the control code.)
NACK (15h): Illegal control code received. (The scanner does not accept the control code.)
Step 3:
When the host receives ACK, it sends parameters.
Step 4:
Response received from scanner.
ACK (06h): Legal control code received. (The scanner accepts the control code.)
NACK (15h): Illegal control code received. (The scanner does not accept the control code.)
1-14
Figure 1-9. Control Code Handshaking (1)
Figure 1-10. Control Code Handshaking (2)
REV.-A