FilmScan 200
3.2 DISASSEMBLY AND ASSEMBLY
This section describes and illustrates the procedures for disassembling and assembling the components
of the FilmSCan 200. The assembly procedures are not described, except for special notes where
necessary, because assembly can be accomplished by performing disassembly in reverse order.
3.2.1 ROM Replacement
Step 1:
Remove the CB (M3x6) screw fixing the ROM cover to the lower base frame.
Step 2:
Remove the ROM cover.
Step 3:
Replace the ROM.
To be sure that the direction of the PROM pins correctly.
3-4
ROM Cover
ROM
Figure 3-1. ROM Replacement
ASSEMBLING POINT
Rev. A