3.2.8.1 Main Scan Motor Unit Removal
Step 1:
Remove the engine unit (Refer to section 3.2.8.)
Step 2:
Dislocate the cable of the main scan motor unit from the hooks of the engine unit.
Step 3:
Remove three CBB (black: M3 x 6) screws that secures the main scan motor unit and take the
main scan motor unit away.
Align the main scan motor cable on the engine unit as shown in Figure 3-18.
The micro switch harness B is aligned at the same hooks with the main scan motor cable.
Rev. A
Screw
Figure 3-18. Main Scan Motor Unit Removal
ASSEMBLING POINT
DISASSEMBLY AND ASSEMBLY
Main Scan Motor
Hook
Optical Unit
15
3-