Table of Contents
Advertisement
System installation
Transmitter
● The transmitter must be located in a safe place protected against water and moisture .
It withstands temperature variations (within technical conditions), however, the penetra-
tion of water would destroy it .
● Fix the transmitter onto the internal wall near to a power socket (220V) .
● Connect the transmitter to the power adapter by plugging the adapter cable
in the transmitter and by plugging the adapter in the mains socket outlet .
Transmitter description
1
3
5
1
Loop interruption LED
2
Unit status LED
3
Correcting zone setting
4
Warning zone setting
5
Antenna wire connector
6
Adapter connector
7
Power ON/OFF
2
4
6
7
5
Advertisement
Table of Contents
