Table of Contents
Advertisement
Principle of Dogtrace d–fence operation
● The unit in the emergency mode is waiting for the dog coming to the prohibited zone
border (formed by an insulated wire as an antenna), divided into two zones .
● If the dog crosses the border of the first (warning) zone, the collar starts emitting sound
signals .
● If the dog does not respond to the sound warning and crosses the border of the second
(correction) zone, the collar emits a signal and adds an electric pulse .
● After the dog returns from the prohibited zone, the system switches to the emergency
mode .
● It is possible to adjust the widths of both zones in defined limits .
● The dog will quickly learn to move only in the restricted area .
● To increase efficiency, it is possible to mark the restricted area with targets
(refer to Optional accessories) .
● The number of dogs with collars is not restricted .
● The antenna (a loop of insulated wire) is fed by the transmitting generator and it must
not be interrupted anywhere .
● The voltage within the antenna does not exceed 12V so there is no risk even if the wire
is interrupted .
1
Warning zone
2
Correction zone
4
Advertisement
Table of Contents
