Command Line Processing; Table 4-3 Keystroke Commands - Edge-Core ES4524M-PoE Management Manual

4
Command Line Interface
Mode Command
Interface interface {ethernet port |
port-channel id| vlan id}
MSTP spanning-tree mst-configuration
Policy Map policy map
VLAN vlan database
For example, you can use the following commands to enter interface configuration
mode, and then return to Privileged Exec mode.
Console(config)#interface ethernet 1/5
. .
.
Console(config-if)#exit
Console(config)#

Command Line Processing

Commands are not case sensitive. You can abbreviate commands and parameters
as long as they contain enough letters to differentiate them from any other currently
available commands or parameters. You can use the Tab key to complete partial
commands, or enter a partial command followed by the "?" character to display a list
of possible matches. You can also use the following editing keystrokes for
command-line processing:
Keystroke
Ctrl-A
Ctrl-B
Ctrl-C
Ctrl-E
Ctrl-F
Ctrl-K
Ctrl-L
Ctrl-N
Ctrl-P
Ctrl-R
Ctrl-U
Ctrl-W
Esc-B
Esc-D
Esc-F
Delete key or backspace key
4-8
Table 4-2 Configuration Commands (Continued)

Table 4-3 Keystroke Commands

Function
Shifts cursor to start of command line.
Shifts cursor to the left one character.
Terminates the current task and displays the command prompt.
Shifts cursor to end of command line.
Shifts cursor to the right one character.
Deletes all characters from the cursor to the end of the line.
Repeats current command line on a new line.
Enters the next command line in the history buffer.
Enters the last command.
Repeats current command line on a new line.
Deletes from the cursor to the beginning of the line.
Deletes the last word typed.
Moves the cursor back one word.
Deletes from the cursor to the end of the word.
Moves the cursor forward one word.
Erases a mistake when entering a command.
Prompt
Console(config-if)#
Console(config-mstp)
Console(config-pmap)
Console(config-vlan)
Page
4-135
4-176
4-246
4-194