Table of Contents
Advertisement
F00
05
5%
F01
00
0%
F02
00
0%
F03
00
0%
F04
00
0%
F05
00
0%
F06
00
0%
↓F07
00
0%
F00
05
5%
F01
00
0%
F02
00
0%
F03
00
0%
F04
00
0%
F05
00
0%
F06
00
0%
↓ F07
00
0%
The
and
key are to be used to move the curser to
the line which you want to see details. The
be pressed to see the details of that file.
4.00
5.01
6.01
7.00
8.01
This screen displays the total five record data in the
file F00.
4.11.3 Clearing selected files
The 【 Memory Management 】 menu screen has to be
entered and the 【 Delete by File 】 menu item has to be
highlighted. Then the
function allows the user to delete the selected data files
previously saved in memory.
4.11.4 Clearing all the files
The 【 Memory Management 】 menu screen has to be
entered and the 【 Delete all Data 】 menu item has to be
highlighted. Then the
key has to be pressed. With this
operation all the measurement data stored in the memory
will be deleted after confirmation.
4.12 Data printing
TU_US-BA-e-1110
Sauter GmbH
Tieringerstr. 11-15
D-72336 Balingen
E-Mail: info@sauter.eu
Instruction Manual
At most eight
files, including
the file name,
the record
counts and the
ratio used of
the file can be
showed on one
screen.
Use the
/
key to
scroll up/down.
Press
to
exit browsing.
Press
to
see details of
that file.
key has to
key has to be pressed. This
TU_US
Before printing, one connection plug of the print cable
(optional parts) has to be inserted into the socket on the
up-left of the main body and the other plug into the
communication socket of the mini-printer.
4.12.1 Print current file
The 【 Print function 】 menu screen has to be entered and
the 【 Print current 】 menu item has to be highlighted.
Then the
key has to be pressed. This operation will
send all data of the current file to the mini printer via
RS-232 port and print them out.
4.12.2 Print selected file
The 【 Print function 】 menu screen has to be entered and
the 【 Print Memory 】 menu item has to be highlighted.
Then the
key has to be pressed. After specifying the
start file name and the end file name, the instrument will
send all the data in the files specified to print out.
4.12.3
The 【 Print function 】 menu screen has to be entered and
the 【 Print all Mem 】 menu item has to be highlighted.
Then the
key has to be pressed. This operation will
send all the memory data to the mini printer to print them
out.
4.13 System Set
The
key has to be pressed on the 【 System set 】 menu
item and enter this submenu from the main menu.
1) When 【 Auto save 】 is set to <On>, the measured data
are automatically stored to the current file.
2) When 【 Key sound 】 is set to <On>, the buzzer will
make a short hoot every time if any key is pressed.
3) When 【 Warn sound 】 is set to <On>, if the measured
value exceeds the limit, the buzzer will make a long hoot.
4) LCD Brightness Set: The
the 【 System set 】 － > 【 LCD Brightness 】 menu item to
enter the LCD Brightness screen.
enhance , and
to weaken the brightness.
The
key has to be pressed to confirm the modification,
or the
key has to be pressed to cancel it
4.14 System information
This
System
information
information about the main body and the firm ware. The
version will change with the firmware.
4.15 EL Backlight
With the background light, it is convenient to work in even
dark condition. The
or off the background light any moment it is needed after
having powered on the instrument.
Tel: +49-[0]7433- 9976-174
Fax: +49-[0]7433-9976-285
Internet: www. sauter.eu
key has to be pressed on
has to be pressed to
function
will
display
key has to be pressed to switch on
the
8
Advertisement
Table of Contents
