Related Manuals for sauter TPE-N
Summary of Contents for sauter TPE-N
- Page 1 Sauter GmbH Ziegelei 1 Phone : +49-[0]7433- 9933-0 D-72336 Balingen Fax: +49-[0]7433-9933-149 e-mail: info@kern-sohn.com Internet: www.sauter.eu Instruction Manual Peel Test Attachment SAUTER TPE-N Version 1.0 12/2020 PROFESSIONAL MEASURING TPE-N-BA-e-2010...
-
Page 2: Table Of Contents
V. 1.0 12/2020 Instruction Manual Peel Test Attachment Congratulations on the purchase of the SAUTER TPE-N test stand. We hope you enjoy your quality measurement system with its wide range of functions. If operated correctly, this high-quality product will give you many years of use. -
Page 3: Attaching The Tpe-N To A Tvo-S 1000/2000 Test Stand
1 Attaching the TPE-N to a TVO-S 1000/2000 test stand In order to be able to attach the TPE-N to a TVO-S 1000/2000 test stand, you must carry out the following steps as preparation: 1.1 Fit the TPE-N running rails according to the drilling pattern of the TVO-S 1000/2000 base plate (marked red). - Page 4 1.3 The next step is to mount the force gauge on the TVO-S 1000/2000. Use the adapter plates supplied with the TVO-S 1000/2000 and the screws provided. During assembly, clamp the TPE-N thread between the adapter plates (see red marking in the picture). The position should be as low as possible to have as much test travel as possible.
-
Page 5: Technical Data
1.5 Now glue your test specimen on the TPE-N and clamp one end of the test specimen in the clamp of the force gauge. IMPORTANT: Glue the test specimen in the centre of the TPE-N. 1.6 As a last step, wire the test stand and the force gauge according to the operating instructions provided in order to start the test of the test specimen (possible with or without software, not included in the scope of delivery). -
Page 6: How It Works
1. The surroundings of the TPE-N must be kept clean; 2. The rail responsible for the movement should be kept free of liquids or objects. 3. The TPE-N should always be stored dust-free and free from moisture when not in use.