Outdoor (Sqo14) Led Behavior - Observa Telecom LTE CPE SQI4N4 Quick Start Manual

5.3 Outdoor (SQO14) LED Behavior
When set up the Outdoor Unit, the LED will have the following behavior.
CPE State Description
Power On Power supply normal
Detect with no After CPE power on，
SIM card detecting no SIM card
Scanning the Scanning the LTE network
LTE network
Network CPE is authenticating
Authentication
Getting IP CPE getting IP address from
Address LTE network
Signal Strength Signal strength is weak
weak
Signal Strength Signal strength is good
good
Signal Strength Signal strength is strong
strong
Firmware CPE starting the firmware
Upgrading upgrading
LAN connected With local LAN connected
LED Behavior
Power LED on
Power LET and three signal
strength LEDs blinking
together, the frequency is 2
times per second.
The first signal strength LED
blinking
Two signal strength LEDs
blinking
Three signal strength LEDs
blinking
Only first signal strength LED
on, the other two off
Two signal strength LEDs on
Three signal strength LEDs on
The first four LEDs blinking
alternately
LAN LED indicator flashing
LED illustration