Observa Telecom LTE CPE SQI4N4 Quick Start Manual page 37

The Wi‐Fi client connects to the CPE using the found SSID.
3. Set Maximum number of devices.
This parameter indicates the maximum number of Wi‐Fi clients that connect to the CPE.
A maximum of 32 clients can connect to the CPE.
4. Set Hide SSID broadcast to Enable.
If the SSID is hidden, the client cannot detect the CPE's Wi‐Fi information.
5. Set AP isolation to Enable.
The clients can connect to the CPE but cannot communicate with each other.
6. Set Security.
If Security is set to NONE (not recommended), Wi‐Fi clients directly connect to the CPE.
This security level is low.
If Security is set to WEP, Wi‐Fi clients connect to the CPE in web‐based encryption
mode.
If Security is set to WPA‐PSK, Wi‐Fi clients connect to the CPE in WPA‐PSK encryption
mode.
If Security is set to WPA2‐PSK, Wi‐Fi clients connect to the CPE in WPA2‐PSK encryption
mode. This mode is recommended because it has a high security level.
If Security is set to WPA‐PSK & WPA2‐PSK, Wi‐Fi clients connect to the CPE in
WPA‐PSK&WPA2‐PSK encryption mode.
7. Set the encryption mode.
If... Sets to
WEP Authentication mode
Encryption password
length
password index
WPA‐PSK WPA‐PSK
WPA encryption
WPA2‐PSK(reco WPA‐PSK
mmended)
WPA encryption
Description





Current This value can be set to 1, 2, 3, or 4. After a key
index is selected, the corresponding key takes
effect.
Only 8 to 63 ASCII characters or 8 to 64 hex
characters can be entered.
This value can be set to TKIP+AES, AES, or
TKIP.
Only 8 to 63 ASCII characters or 8 to 64 hex
characters can be entered.
This value can be set to TKIP+AES, AES, or
Shared authentication: The client
connects to the CPE in shared
authentication mode.
Open authentication: The client connects
to the CPE in open authentication mode.
Both: The client connects to the CPE in
shared or open authentication mode.
128bit: Only 13 ASCII characters or 26 hex
characters can be entered in the Key 1 to
Key 4 boxes.
64bit: Only 5 ASCII characters or 10 hex
characters can be entered in the Key 1 to
Key 4 boxes.