Observa Telecom LTE CPE SQI4N4 Quick Start Manual page 38

WPA‐PSK & WPA‐PSK
WPA2‐PSK
WPA encryption
8. Click Submit. As shown in Figure 4‐3.
4.3 Access Management
4.3.1 Setting the Access Policy
This function enables you to set access restriction policies for each SSID to manage access to
the CPE.
To configure Wi‐Fi MAC control settings, perform the following steps:
1. Choose Wi‐Fi > Access Management.
2. In the WLAN Access List Settings area, set Access Policy.
The access policy can be set to Disable, Blacklist or Whitelist.

If SSID's MAC Access is set to Disable, access restrictions do not take effect.

If SSID's MAC Access is set to Blacklist, only the devices that are not in the blacklist
can connect to the CPE.

If SSID's MAC Access is set to Whitelist, only the devices in the whitelist can
connect to the CPE.
3. Click Submit. As shown in Figure 4‐4.
TKIP.
Only 8 to 63 ASCII characters or 8 to 64 hex
characters can be entered.
This value can be set to TKIP+AES, AES, or
TKIP.
Figure 4‐3