Observa Telecom LTE CPE SQI4N4 Quick Start Manual page 61

2. Set DST enable.
3. Set Start Time and End Time.
4. Click Submit. As shown in Figure 8‐11.
The CPE will automatically provide the DST time based on the time zone.
8.6 DDNS
Dynamic Domain Name Server (DDNS) service is used to map the user's dynamic IP address to a
fixed DNS service.
To configure DDNS settings, perform the following steps:
1. Choose System > DDNS.
2. Set DDNS to Enable.
3. In Service provider, choose DynDNS.org or oray.com.
4. Enter Domain name and Host name. For example, if the domain name provided by your service
provider is test.customtest.dyndns.org, enter customtest.dyndns.org as Domain name, and test
as Host name.
5. Enter User name and Password.
6. Click Submit. As shown in Figure 8‐12.
Figure 8‐11