Getting Started - HIKVISION DS-2AE7232TI-A User Manual

HD-TVI Speed Dome DS-2AE7232TI-A User Manual

2 Getting Started

• Power-up Action: After the speed dome is powered on, it will perform a series of self-test actions. It
runs pan checking first, then tilt checking, and camera checking last. After the power-up actions, the
system information will be displayed for 120 s on the live view screen, as shown below.
Table 2-1 Descriptions of the System Information
System Info
SN
ADDRESS
COM Format
PROTOCOL
FIRMWARE
HARDWARE
BUILD DATE
NOTES:
• You must configure the camera's address and baud rate to be the same as the control devices.
• The speed dome is self-adaptive to the PELCO-D, PELCO-P, and PRIVATE-Code protocols.
• Basic Operations: You can operate the camera by using a control device (e.g., control keyboard, DVR,
DVS, etc.). In this manual, accessing the speed dome via a Web browser will be used as an example.
• Panning and Tilting: Click the direction buttons to control the speed dome pan and tilt movement.
• Zooming: Click the ZOOM+ and ZOOM- buttons to control the zooming.
• Focusing: Click the FOCUS+ and FOCUS- buttons to adjust the focus.
• Iris: Click the IRIS+ and IRIS- buttons to adjust the iris.
UM THD DS-2AE7232T-x 020519NA
Figure 1, System Information
Description
The serial no. of the speed dome, which is unique
The default communication address of the speed dome
The communication settings of the speed dome, including baud rate (2400 by
default), data bits (8 by default), and stop bits (1 by default)
Communication with other devices
Firmware version
Hardware version
Date when the software program was compiled
10