Headless Mode - Hubsan X4 DESIRE H502S Instruction Manual

EXIT RTH MODE
Pull down the RTH Switch, the X4 will exit the RTH Mode.

6.3 HEADLESS MODE

Headless mode means the X4
will default any directions
(corresponding to the directions
of transmitter sticks) as the up ahead
when the mode is activated.
Press the Throttle stick 0.5 second to switch on/ off headless mode.
Press the stick to enter into Headless Mode, indicated by two "beep" sounds and the
"HEADLESS ON" displays on the LCD.
Press the stick again to exit Headless Mode, indicated by one "beep" sound and the
"HEADLESS OFF" displays on the LCD.
6.4 FOLLOW ME MODE
Follow Me Mode means the
drone follows the transmitter
automatically as it has
built-in GPS system.
MODE 2
MODE 2
MODE 1
MODE 1
10
©
2016 Hubsan