Sata Dom Power Select Jumper - VIA Technologies EPIA-M920 User Manual

3.2. SATA DOM Power Select Jumper

The SATA connectors can be used to support Disk-on-Module flash drives.
The power for SATA DOM is controlled by the jumper labeled as "J12".When
the jumpers are set, +5V will be delivered to the 7
connectors. The jumper settings are shown below.
Figure 35 Figure Figure Figure 35 35 35: SATA DOM voltage select jumper : SATA DOM voltage select jumper : SATA DOM voltage select jumper : SATA DOM voltage select jumper
Table Table Table Table 31 31: SATA DOM voltage select jumper settings 31 31 : SATA DOM voltage select jumper settings : SATA DOM voltage select jumper settings : SATA DOM voltage select jumper settings
SATA1 Setting SATA1 SATA1 SATA1 Setting Setting Setting Pin 2 Pin 2 Pin 2 Pin 2
DOM support On
Regular (default) Off
SATA2 Setting SATA2 Setting Pin 1 Pin 1
SATA2 Setting SATA2 Setting Pin 1 Pin 1
DOM support On
Regular (default) Off
EPIA EPIA- - - - M920 M920 User Manual
EPIA EPIA M920 M920
th
pin of the SATA
Pin 4 Pin 4 Pin 4 Pin 4 Pin 6 Pin 6 Pin 6 Pin 6
On Off
On On
Pin 3 Pin 3 Pin 5 Pin 5
Pin 3 Pin 3 Pin 5 Pin 5
On Off
On On
User Manual
User Manual User Manual
38