On Board Configuration - VIA Technologies EPIA-M920 User Manual

6.6.8. On Board Configuration

The OnBoard Device Configuration screen has the following features.
Figure 59 Figure Figure Figure 59 59 59: Illustration of On Board Configuration screen : Illustration of On Board Configuration screen : Illustration of On Board Configuration screen : Illustration of On Board Configuration screen
OnBoard Device Configura OnBoard Device Configurat t t t ion
OnBoard Device Configura OnBoard Device Configura
6.6.8.1. OnBoard LAN Enable 6.6.8.1. OnBoard LAN Enable
6.6.8.1. 6.6.8.1. OnBoard LAN Enable OnBoard LAN Enable
The OnBoard LAN Enable feature determines whether the onboard LAN
controller will be used or not.
6.6.8.2. 6.6.8.2. 6.6.8.2. S5 Wakeup by PME# 6.6.8.2. S5 Wakeup by PME# S5 Wakeup by PME# S5 Wakeup by PME#
The S5 Wakeup by PME# feature enables the BIOS to allow remote wake-up
from the S5 power off state through the PCI bus.
6.6.8.3. EuP/ErP Lot6 support 6.6.8.3. EuP/ErP Lot6 support
6.6.8.3. 6.6.8.3. EuP/ErP Lot6 support EuP/ErP Lot6 support
The EuP/ErP Lot6 Support feature enables the BIOS to reduce the power draw
to less than 1W when the system is in standby mode. This feature has two
options: enabled and disabled.
ion
ion ion
EPIA- - - - M920 EPIA M920 User Manual User Manual
EPIA EPIA M920 M920 User Manual User Manual
63