Radyne DMD20 Installation And Operation Manual page 84

DMD20/DMD20 LBST Universal Satellite Modem
LB SYNTH PLL
IF SYNTH PLL
ETHERNET WAN
FORCED ALARM
TX MINOR (menu)
TERR CLK ACT
TERR DATA ACT
TX TERR AIS
DnI FRAME LOCK
DnI M-FRAME LOCK
TX DVB FRM LOCK
BUC CURRENT
BUC VOLTAGE
TM103 – Rev. 2.5
{Pass/Fail, Unmasked/Masked}
Indicates that the Tx L-Band Synthesizer is not locked.
This alarm will flash on during certain modem parameter
changes. A solid indication points toward a configuration
problem within the modem.
{Pass/Fail, Unmasked/Masked}
Indicates that the Tx IF Synthesizer is not locked. This
alarm will flash on during certain modem parameter
changes. A solid indication points toward a configuration
problem within the modem.
{Pass/Fail, Unmasked/Masked}
Indicates that the interface card is faulted and will not
pass data (displays only when the Ethernet Card is
installed and the Ethernet Interface is selected).
{DISABLED, ENABLED}
Allows user to disable or enable forcing of a Tx
Summary Alarm.
{Pass/Fail, Unmasked/Masked}
Indicates no Terrestrial Clock activity.
{Pass/Fail, Unmasked/Masked}
Indicates no Tx Data activity.
{Pass/Fail, Unmasked/Masked}
Indicates that AIS has been detected in the Tx Data
Stream.
{Pass/Fail, Unmasked/Masked}
Indicates that the TX Oversample Clock PLL is not
locked. This alarm will flash on during certain modem
parameter changes. A solid indication points toward a
configuration problem within the modem.
{Pass/Fail, Unmasked/Masked}
Indicates that Tx Composite Clock PLL is not locked.
This alarm will flash on during certain modem parameter
changes. A solid indication points toward a problem with
the incoming clock to the modem (SCTE).
{Pass/Fail, Unmasked/Masked}
Indicates that Tx input data stream framing does not
match the user selected TX TERR FRAMING.
{Pass/Fail, Unmasked/Masked}
Indicates that current is either below or above the
threshold limits of the LNB, as specified by the modem.
Only active when voltage is enabled.
{Pass/Fail, Unmasked/Masked}
User Interfaces
4-25