Radyne DMD20 Installation And Operation Manual page 95

User Interfaces
TRAP VERSION
AUTHORIZATION
RD COMMUNITY
RDWR COMMUNITY
FTP (menu)
USER ID
PASSWORD
HW/FW CONFIG (menu)
FIRMWARE REV
M&C REV
MAIN BOARD (menu)
4-36
DMD20/DMD20 LBST Universal Satellite Modem
{V1, V2}
This controls the type of message format used when a
message trap is generated by the equipment and bound
for a SNMP Host. Messages will only be sent if the unit
has been authorized to do so.
{TRAPS OFF, TRAPS ON}
This controls the type of message format used when a
message trap is generated by the equipment and bound
for a SNMP host. Messages will only be sent if the unit
has been authorized to do so.
{16 characters of name}
This menu is only displayed when SNMP VERSION is
set to V1 & V2.
This is the community that a host must be acting within
when an OID variable is requested by a V1/V2 SNMP
message.
{16 characters of name}
This menu is only displayed when SNMP VERSION is
set to V1 & V2.
This is the community that a host must be acting within
when an OID variable is being changed by a V1/V2
SNMP message.
Allows the user to enter the user identification for access
to an FTP session.
Allows the user to enter the password for access to an
FTP session.
Displays the installed firmware revision.
Displays the installed Monitor and Control revision.
TM103 - Rev. 2.5