Terminal Screens - Radyne DMD20 Installation And Operation Manual

User Interfaces
Modify the DMD20 selection, if necessary, to match the settings (the Front Panel
'SYSTEM' Sub-Menu contains all the Terminal Emulation Controls).

4.12 Terminal Screens

1. Modem configuration can be monitored and controlled via a full screen
presentation of current settings and status. The <Esc> Key redraws the entire
screen and aborts input any time. The Spacebar refreshes the status area and is
used to scroll through selection when in user input mode.
2. To modify an item, the user simply presses its terminal selection followed by
<Enter>. The modem responds by presenting the options available and
requesting input. If the input is multiple choices, the user is prompted to use the
Spacebar to scroll to the desired selection and then press <Enter>. An input can
be aborted at any time by pressing <Esc>. Invalid input keys cause an error
message to be displayed on the terminal. Some input or display status only
appears when the user has the right access levels.
Main Menu Screen:
4-62
DMD20/DMD20 LBST Universal Satellite Modem
TM103 - Rev. 2.5