DMD20/DMD20 LBST Universal Satellite Modem
Rear Panel Interfaces
Rear Panel Interfaces
5
This section discusses the electrical interfaces available from the rear panel. All locations are as
viewed from the rear of the unit unless otherwise specified.
5.0 DMD20 Connections
All DMD20 connections are made to labeled connectors located on the rear of the unit (refer to
Figure 5-1 for the standard unit and Figure 5-2 for the DMD20 LBST). The connector definitions
below are those on the DMD20 unit. Any connection interfacing to the DMD20 must be the
appropriate mating connector.
Figure 5-1. DMD20 Universal Satellite Modem Rear Panel Configurations
TM103 – Rev. 2.5
5-1