DSP-4000 Series
Users Manual
Standard Accessories
A DSP-4000 Series test tool comes with the following accessories, which are
shown in Figure 1-1. If the test tool is damaged or something is missing, contact
the place of purchase immediately.
•
1 DSP-4000SR, DSP-4100SR, or DSP-4300SR remote unit (not shown)
•
The following link interface adapters:
◊
◊
◊
•
2 AC adapter/chargers 120 V (US only) or universal adapter/chargers and line
cords (outside North America)
•
1 Memory card reader (DSP-4100, DSP-4300)
•
1 16 MB memory card (DSP-4100, DSP-4300)
•
1 Memory card carrying case (DSP-4100, DSP-4300; not shown)
•
2 NiMH battery packs (installed)
•
2 Headsets
•
1 DSP-4000 Calibration Module
•
1 RJ45 to BNC adapter
•
1 PC serial interface (EIA-232C) cable
•
2 Carrying straps
•
1 LinkWare CD
•
1 DSP-4000 Series Manual CD (includes complete users manual)
•
1 DSP-4000 Series Getting Started Guide
•
1 Warranty registration card (not shown)
•
1 Soft carrying case (not shown)
If you purchased optional Fiber Test Adapters, refer to the Fiber Test Adapter
users manual for a list of fiber accessories.
1-4
With the DSP-4000 and DSP-4100: 2 DSP-LIA011 Basic Link Adapters
for Cat 5E and 2 DSP-LIA012 Channel Adapters for Cat 6
With the DSP-4000PL: 2 DSP-LIA101 Permanent Link Adapters for Cat 6
and 2 DSP-LIA012 Channel Adapters for Cat 6
With the DSP-4300: 2 DSP-LIA101 Permanent Link Adapters for Cat 6,
1 DSP-LIA012 Channel Adapter for Cat 6, and 1 DSP-LIA013
Channel/Traffic Adapter for Cat 6