Viewing And Printing Saved Reports - Fluke DSP-4100 User Manual

Viewing and Printing Saved Reports

Chapter 5 provides the following information:
•
Instructions for viewing, deleting, and renaming test reports saved in the test
tool's memory.
•
Instructions for sending saved test reports to a serial printer.
Viewing, Renaming, and Deleting Test Reports
To view test reports, delete test reports, or rename the cable identification given on
a saved report, proceed as follows:
1. Turn the rotary switch to SPECIAL FUNCTIONS.
2. Press E to select View/Delete Test Reports. The
VIEW/DELETE TEST REPORTS screen appears showing the first screen of
test report labels. The reports are listed in the order saved, starting with the
oldest report in memory. Each test report label shows the date and time the
report was saved, the cable identification name, and an overall test result (pass,
fail, or warning).
3. Use # Page Up, $ Page Down, and D U to highlight the report
you want to view, rename, or delete.
4. Press the softkey labeled with the function you want. The softkeys function as
follows:
•
! Delete Report: Deletes the highlighted report from memory.
•
@ View Result: Displays the overall Autotest result and
headroom value for the highlighted report. To see detailed results for a
test, press View Result again; then highlight the desired test and
press E.
Chapter 5
5-1