Fluke DSP-4100 User Manual page 40

DSP-4000 Series
Users Manual
Item
O
AC power indicator
P
AC adapter/ charger jack
Q
Eject button (DSP-4100/4300)
R
Memory card slot
(DSP-4100/4300)
2-20
Table 2-4. Main Unit Features (cont.)
Feature Description
LED off, Battery is not charging.
unit turned off The charger is not plugged in.
LED off, Battery is not charging.
unit turned on The charger is not plugged in
or the test tool is running a
test. When the test is
finished, charging resumes
unless the battery is already
charged (>80%).
LED flashing red Fast charge pending.
Charging is beginning. This
state may last for several
minutes until fast charging
begins.
LED steady red Fast charge.
The unit stays in fast charge
mode for up to 4 hours, or
until either the battery is fully
charged or a test is initiated.
LED steady Charge complete.
green Fast charge is complete. The
unit enters trickle charge
mode.
Connection for the ac adapter/charger supplied with
the test tool.
Button for ejecting the memory card.
Slot for the memory card used for saving Autotest
results on a DSP-4100 or DSP-4300 test tool.