Fluke DSP-4100 User Manual page 15

•
Sends stored test reports to a host computer or directly to a serial printer.
•
Includes a stored library of common test standards and cable types for copper
and fiber installations. Flash EPROM accepts test standard and software
upgrades.
•
Allows for configuration of custom test standards.
High-Definition Time Domain Crosstalk (HDTDX ) analyzer locates the
•
position of crosstalk problems in a link.
High-Definition Time Domain Reflectrometry (HDTDR ) analyzer locates
•
the position of return loss problems in a link.
•
Produces plots of NEXT, ELFEXT, PSNEXT, PSELFEXT, attenuation, ACR,
PSACR, and RL. Shows NEXT, ELFEXT, PSNEXT, PSELFEXT,
attenuation, ACR, and PSACR results up to 350 MHz. Gives remote results
for NEXT, PSNEXT, ACR, and RL.
•
DSP-LIA013 adapters let you monitor network traffic on 10/100BASE-TX
Ethernet systems, monitors impulse noise on twisted pair cable, helps you
identify hub port connections, and determines which standards are supported
by a hub port connection. (Standard with DSP-4300; optional with other
models.)
•
Tone generator lets you use an inductive pickup device, such as the Fluke
Networks 140 A-Bug Tone Probe, to identify cables in a LAN installation.
•
Optional link interface adapters let you test additional types of LAN cabling.
Introduction
Overview of Features
1
1-3